ISO 50001 Certification in Malaysia – Get Certified with SCS
SCS Certification – Malaysia Office
SCS Certification – Malaysia Office
SCS Certification
Jalan Pinang
50450 Kuala Lumpur
Malaysia
Phone: +60 11 6263 6611
Enquiry: Contact SCS Certification
http://www.scscertification.com/contactus.php
ISO 50001 certification in Malaysia helps organizations establish a structured Energy Management System (EnMS) to monitor energy use, improve energy performance, reduce avoidable energy consumption and continually improve energy efficiency.
For Malaysian organizations, ISO 50001 has particular relevance because the country's energy-efficiency framework has changed significantly with the Energy Efficiency and Conservation Act 2024 (EECA 2024) and the Energy Efficiency and Conservation Regulations 2024, effective from 1 January 2025. EECA 2024 applies to Peninsular Malaysia and the Federal Territory of Labuan.
For organizations meeting the prescribed 21,600 GJ energy-consumption threshold over 12 consecutive months, Malaysian requirements include appointing a Registered Energy Manager (REM), developing and implementing an Energy Management System, submitting Energy Efficiency and Conservation reports, and conducting the applicable energy audit.
ISO 50001 certification and EECA 2024 compliance are related but not the same thing. ISO 50001 is an international management-system certification, while EECA 2024 creates statutory obligations administered by the Energy Commission.
Get ISO 50001 certification with SCS.
http://www.scscertification.com/contactus.php
What Is ISO 50001 Certification in Malaysia?
ISO 50001 is an international standard for an Energy Management System.
It provides Malaysian organizations with a systematic framework to:
- Understand energy consumption
- Identify significant energy uses
- Establish energy performance indicators
- Establish energy baselines
- Set energy objectives and targets
- Develop energy action plans
- Control energy-related processes
- Monitor energy performance
- Evaluate energy results
- Improve energy performance continually
The Malaysian Standards system has published Malaysian Standards based on ISO 50001. The Department of Standards Malaysia maintains the national standards framework.
For organizations operating in Malaysia, the ISO 50001 framework can be used alongside applicable Malaysian energy legislation and Energy Commission requirements.
Why ISO 50001 Is Important for Malaysian Businesses
Energy can represent a significant operating cost for Malaysian manufacturers, commercial buildings, data centres, hospitals, hotels and other energy-intensive organizations.
ISO 50001 provides a management structure for moving from simply monitoring electricity bills to systematically managing energy performance.
A Malaysian organization can use the system to identify:
- High-energy processes
- Energy losses
- Inefficient equipment
- Excessive compressed-air consumption
- Cooling-system inefficiencies
- HVAC energy consumption
- Production-related energy variation
- Opportunities for renewable energy
- Opportunities for operational improvement
The standard can therefore support both operational efficiency and broader sustainability objectives.
ISO 50001 and Malaysia's Energy Efficiency and Conservation Act 2024
One of the most important differences between a generic ISO 50001 article and a Malaysia-specific ISO 50001 article is the country's current statutory energy framework.
The Energy Efficiency and Conservation Act 2024 (Act 861) establishes Malaysia's legal framework for energy efficiency and conservation.
The Energy Commission identifies the following framework:
- Energy Efficiency and Conservation Act 2024
- Energy Efficiency and Conservation Regulations 2024
- Guidelines on ascertaining an energy consumer
- Guidelines on Registered Energy Manager functions and duties
- Guidelines on Energy Management System
- Guidelines on EE&C reporting
- Guidelines on energy audit reporting
- Guidelines relating to building energy intensity
- Guidelines on energy-using products
- Guides for registration of energy managers and auditors.
This makes EECA 2024 an important consideration for Malaysian organizations developing an energy-management strategy.
Does EECA 2024 Apply to All of Malaysia?
No.
The Energy Commission states that EECA 2024 applies to Peninsular Malaysia and the Federal Territory of Labuan.
Therefore, organizations should not automatically describe EECA 2024 obligations as applying identically to:
- Kuala Lumpur
- Selangor
- Penang
- Johor
- Melaka
- Negeri Sembilan
- Perak
- Kedah
- Pahang
- Terengganu
- Kelantan
- Perlis
- Labuan
- Sabah
- Sarawak
For Sabah and Sarawak, organizations should determine the applicable energy legislation and regulatory requirements separately.
ISO 50001 certification itself can still be relevant to organizations in Sabah and Sarawak, subject to the certification scope and applicable regulatory requirements.
What Is the 21,600 GJ Threshold in Malaysia?
Under the EECA framework, an energy consumer whose energy usage equals or exceeds 21,600 GJ during 12 consecutive months is subject to specified obligations.
This threshold is particularly important for large:
- Manufacturing plants
- Semiconductor facilities
- Electronics factories
- Chemical plants
- Pharmaceutical facilities
- Automotive plants
- Data centres
- Large commercial buildings
- Hospitals
- Hotels
- Food-processing facilities
- Industrial operations
The organization should determine its actual energy consumption and whether it receives an applicable notice from the Energy Commission.
What Happens When an Organization Becomes an Energy Consumer?
The Energy Commission identifies several key obligations.
An applicable energy consumer must:
- Appoint a Registered Energy Manager.
- Develop and implement an Energy Management System.
- Submit Energy Efficiency and Conservation reports.
- Conduct the required energy audit through a Registered Energy Auditor.
These statutory obligations should be planned alongside, rather than confused with, ISO 50001 certification.
Registered Energy Manager Requirements in Malaysia
A Malaysian energy consumer subject to the EECA requirements must appoint a Registered Energy Manager (REM) in accordance with the applicable regulations.
The Energy Commission states that the appointment must be made within three months from the date of notice.
The Commission also maintains registration arrangements for energy managers and energy auditors, including practising certificates.
First Type Registered Energy Manager
The Energy Commission identifies a First Type REM for energy consumers with annual energy consumption between 21,600 GJ and 50,000 GJ.
The First Type REM can support:
- Energy-data collection
- Energy analysis
- EnMS implementation
- Energy-performance monitoring
- EE&C reporting
- Energy-saving recommendations
Second Type Registered Energy Manager
For higher-energy-consuming organizations, the Energy Commission identifies the Second Type REM arrangement.
The Second Type REM is intended for energy consumers with annual consumption exceeding 21,600 GJ, subject to the applicable regulatory requirements and qualification conditions.
Organizations should verify the applicable REM category directly with the Energy Commission.
Energy Management System Requirements Under EECA 2024
For an applicable energy consumer, the Energy Commission requires an EnMS to be developed and implemented based on its issued EnMS guideline.
The Commission states that the EnMS must be developed and implemented within one year from the appointment of the first REM.
This creates a strong practical connection between:
EECA 2024 → REM → EnMS → Energy Performance → EE&C Reporting
ISO 50001 can provide an internationally recognized management-system framework for organizations seeking a structured approach to energy management.
ISO 50001 vs EECA 2024 Compliance
These two should not be treated as identical.
| ISO 50001 | EECA 2024 |
|---|---|
| International Energy Management System standard | Malaysian legislation |
| Certification is assessed by a certification body | Compliance is overseen by the Energy Commission |
| Focuses on systematic energy-performance improvement | Establishes statutory energy-efficiency and conservation obligations |
| Certification depends on the defined EnMS scope | Applicability depends on Malaysian legal requirements |
| Can support organizational sustainability | Creates specific legal duties for applicable energy consumers |
ISO 50001 certification does not automatically mean that an organization has fulfilled every statutory EECA 2024 requirement.
A Malaysian company should evaluate both separately.
ISO 50001 Requirements for Malaysian Organizations
A Malaysian ISO 50001 implementation should be based on the organization's actual energy profile.
Understanding the Organization and Its Energy Context
The organization should understand the internal and external issues that can affect its Energy Management System and energy performance.
Examples include:
- Energy prices
- Production changes
- Climate conditions
- Technology
- Regulatory requirements
- Customer requirements
- Equipment efficiency
- Business expansion
Energy Policy
Top management establishes an energy policy appropriate to the organization.
The policy provides direction for:
- Energy performance improvement
- Energy efficiency
- Energy use
- Energy consumption
- Objectives and targets
- Continual improvement
Energy Review
The energy review evaluates:
- Energy sources
- Energy consumption
- Energy uses
- Significant energy uses
- Relevant variables
- Energy-performance opportunities
For a Malaysian manufacturing facility, this could include electricity, natural gas, diesel, LPG, steam and other applicable energy sources.
Significant Energy Uses
The organization identifies energy uses that are significant according to its own criteria.
Examples include:
- Chillers
- HVAC
- Compressors
- Boilers
- Furnaces
- Motors
- Pumps
- Production machinery
- Refrigeration
- Process heating
Energy Performance Indicators
EnPIs help the organization measure meaningful energy performance.
Examples include:
- kWh per tonne
- kWh per production unit
- kWh per batch
- kWh per operating hour
- Energy per square metre
- Energy per occupied room
- Energy per unit of output
Energy Baseline
An energy baseline provides a reference against which changes in energy performance can be evaluated.
Energy Objectives and Targets
Objectives and targets should be appropriate to the organization's energy profile and improvement opportunities.
Energy Action Plans
Action plans can define:
- Improvement actions
- Responsible personnel
- Resources
- Completion dates
- Measurement methods
- Expected performance outcomes
Operational Control
Processes associated with significant energy uses should be appropriately controlled.
Monitoring and Measurement
Energy information should be monitored, measured and analyzed using appropriate methods.
Internal Audit
Internal audits evaluate whether the EnMS is implemented and maintained effectively.
Management Review
Top management reviews the suitability, adequacy and effectiveness of the EnMS and energy performance.
Malaysian Legal and Regulatory Requirements Relevant to Energy Management
A Malaysian organization should identify the legal and other requirements relevant to its operations.
Depending on the organization, this may include:
- Energy Efficiency and Conservation Act 2024
- Energy Efficiency and Conservation Regulations 2024
- Energy Commission requirements
- Registered Energy Manager requirements
- Registered Energy Auditor requirements
- EE&C reporting requirements
- Energy Management System guidelines
- Energy audit guidelines
- Building energy requirements
- Energy-using-product requirements
- Other applicable federal or state requirements
The Energy Commission currently provides dedicated guidelines for energy consumers, REMs, EnMS, EE&C reporting, energy audits, buildings and energy-using products.
EE&C Reporting Requirements in Malaysia
Applicable energy consumers must submit Energy Efficiency and Conservation (EE&C) Reports.
The Energy Commission states that the first report is due within 30 days after the end of one year from the date of appointment of the first REM, with subsequent reports submitted annually based on the anniversary of that appointment.
This makes reliable energy data particularly important.
An organization implementing ISO 50001 can establish structured processes for collecting and analyzing energy-performance information, while still ensuring that statutory reports meet the Energy Commission's own requirements.
Energy Audit Requirements Under EECA 2024
An applicable energy consumer must appoint a Registered Energy Auditor (REA) to conduct the required energy audit and submit the energy-audit report.
The Energy Commission states that the first audit report must be submitted within one year from the date of notice, with subsequent audits generally required every five years, subject to applicable provisions and exemptions.
An EECA energy audit should not be confused with an ISO 50001 certification audit.
Energy Audit vs ISO 50001 Certification Audit
An energy audit evaluates energy use and identifies energy-saving opportunities.
An ISO 50001 certification audit evaluates whether the organization's Energy Management System conforms to ISO 50001 requirements.
A Malaysian organization may therefore need to manage both activities where applicable.
ISO 50001 for Malaysian Manufacturing Companies
Malaysia's manufacturing sector provides significant opportunities for structured energy management.
Relevant sectors include:
- Electronics
- Semiconductors
- Electrical products
- Automotive
- Chemicals
- Pharmaceuticals
- Rubber
- Plastics
- Food processing
- Palm oil
- Steel
- Cement
- Machinery
- Precision engineering
- Packaging
- Medical devices
Typical significant energy uses can include:
- Chillers
- Compressors
- Motors
- Pumps
- Furnaces
- Boilers
- HVAC
- Production machinery
- Refrigeration
ISO 50001 for Semiconductor and Electronics Companies in Malaysia
Malaysia's electronics and semiconductor sector can have complex energy requirements.
An ISO 50001 energy review may consider:
- Cleanroom HVAC
- Chillers
- Compressed air
- Vacuum systems
- Process cooling
- Production equipment
- Cooling towers
- Electrical distribution
Relevant locations include Penang, Kulim, Selangor, Kuala Lumpur and other electronics manufacturing clusters.
ISO 50001 for Automotive Companies in Malaysia
Automotive and automotive-component manufacturers can use ISO 50001 to manage:
- Welding
- Painting
- Heat treatment
- CNC machinery
- Compressed air
- HVAC
- Furnaces
- Assembly
- Material handling
Automotive and engineering facilities in Selangor, Negeri Sembilan, Melaka, Penang and Kedah can particularly benefit from process-specific energy management.
ISO 50001 for Pharmaceutical Companies in Malaysia
Pharmaceutical facilities can have significant energy requirements associated with:
- Cleanrooms
- HVAC
- Chillers
- Refrigeration
- Compressed air
- Boilers
- Laboratory systems
- Water systems
The EnMS should consider product quality and controlled operating conditions while addressing energy-performance opportunities.
ISO 50001 for Chemical Industries in Malaysia
Chemical plants may have substantial energy requirements from:
- Process heating
- Cooling
- Steam
- Pumps
- Compressors
- Reactors
- Distillation
- HVAC
An energy review should identify the processes that have the greatest influence on energy performance.
ISO 50001 for Palm Oil and Food Processing Industries
Malaysia's palm-oil and food-processing industries may have significant energy uses associated with:
- Boilers
- Steam
- Sterilization
- Drying
- Motors
- Pumps
- Processing equipment
- Refrigeration
ISO 50001 can help establish consistent monitoring and improvement processes across these operations.
ISO 50001 for Data Centres in Malaysia
Malaysia's data-centre industry has become an increasingly important energy-management sector.
Important locations include:
- Johor
- Kuala Lumpur
- Selangor
- Cyberjaya
Energy management may cover:
- IT load
- Chillers
- Cooling
- UPS systems
- Power distribution
- HVAC
- Backup infrastructure
Data-centre EnPIs should be selected according to the facility's operating characteristics and relevant variables.
ISO 50001 for Hotels in Malaysia
Hotels and resorts can address:
- Guest-room HVAC
- Central cooling
- Chillers
- Kitchens
- Laundry
- Refrigeration
- Hot water
- Swimming pools
- Lighting
Important hospitality markets include:
- Kuala Lumpur
- Penang
- Langkawi
- Johor
- Melaka
- Sabah
- Sarawak
ISO 50001 for Hospitals in Malaysia
Hospitals operate continuously and may have significant energy consumption.
Potential significant energy uses include:
- HVAC
- Chillers
- Sterilization
- Medical equipment
- Refrigeration
- Hot water
- Lighting
- Pumps
ISO 50001 for Shopping Malls and Commercial Buildings
Large Malaysian commercial facilities can examine:
- Chillers
- Air conditioning
- Lighting
- Escalators
- Lifts
- Pumps
- Ventilation
- Building-management systems
Where applicable, organizations should separately determine whether EECA building-related requirements apply.
ISO 50001 Certification in Kuala Lumpur
Kuala Lumpur has substantial:
- Commercial buildings
- Hotels
- Hospitals
- Shopping complexes
- Data centres
- Corporate offices
- Service organizations
The energy-management focus can include HVAC, central cooling, lighting, lifts, IT infrastructure and building services.
ISO 50001 Certification in Selangor
Selangor is one of Malaysia's most important industrial and commercial regions.
Relevant sectors include:
- Electronics
- Semiconductor supply chain
- Automotive
- Chemicals
- Pharmaceuticals
- Food processing
- Warehousing
- Logistics
- Data centres
Industrial areas around Shah Alam, Klang, Petaling Jaya, Subang Jaya and other Selangor locations can have significant energy-management opportunities.
ISO 50001 Certification in Penang
Penang is particularly important for:
- Semiconductor
- Electronics
- Electrical manufacturing
- Medical devices
- Precision engineering
- Industrial manufacturing
Energy-management priorities can include cleanroom HVAC, compressed air, process cooling, production equipment and utilities.
ISO 50001 Certification in Johor
Johor has growing activity in:
- Data centres
- Manufacturing
- Logistics
- Warehousing
- Industrial development
- Commercial facilities
For data centres, cooling, IT load, UPS systems and power infrastructure can be important energy uses.
ISO 50001 Certification in Melaka
Melaka has activities involving:
- Electronics
- Automotive
- Manufacturing
- Pharmaceuticals
- Food processing
- Hospitality
Energy reviews should be tailored to the organization's actual production and facility profile.
ISO 50001 Certification in Negeri Sembilan
Relevant sectors include:
- Automotive
- Manufacturing
- Pharmaceuticals
- Chemicals
- Food processing
- Engineering
Major energy uses may include production equipment, HVAC, boilers, compressors and process systems.
ISO 50001 Certification in Kedah
Kedah is relevant to:
- Electronics
- Semiconductor supply chains
- Manufacturing
- Industrial operations
Organizations should evaluate production energy, cleanroom systems, compressors, chillers and HVAC where applicable.
ISO 50001 Certification in Perak
Perak organizations can apply ISO 50001 to:
- Manufacturing
- Food processing
- Engineering
- Commercial buildings
- Healthcare
- Industrial facilities
ISO 50001 Certification in Pahang, Terengganu, Kelantan and Perlis
Organizations in these states can also implement ISO 50001 according to their own energy profile.
Relevant sectors may include:
- Manufacturing
- Food processing
- Hospitality
- Commercial facilities
- Industrial operations
- Healthcare
- Logistics
The applicable Malaysian regulatory requirements should be determined according to the organization's location and activities.
ISO 50001 Certification in Sabah and Sarawak
ISO 50001 can be relevant to organizations in Sabah and Sarawak.
However, the statutory EECA 2024 framework should not automatically be represented as applying to these states.
The Energy Commission specifically states that EECA 2024 applies to Peninsular Malaysia and the Federal Territory of Labuan.
Therefore, Sabah and Sarawak organizations should identify their applicable energy laws and regulatory authorities separately while considering ISO 50001 certification according to their business requirements.
ISO 50001 Certification Process in Malaysia
Step 1 – Initial Certification Enquiry
Provide SCS with information about:
- Company name
- Location
- Industry
- Number of employees
- Number of sites
- Activities
- Major energy sources
- Intended certification scope
http://www.scscertification.com/contactus.php
Step 2 – Determine Certification Scope
The organization establishes the boundaries and applicability of its EnMS.
Step 3 – Determine Malaysian Regulatory Applicability
Determine whether the organization needs to consider:
- EECA 2024
- 21,600 GJ threshold
- REM
- EnMS statutory requirements
- EE&C reporting
- Energy audit
- Other applicable requirements
Step 4 – Conduct Energy Review
Analyze energy sources, consumption, uses, significant energy uses and performance opportunities.
Step 5 – Establish EnPIs and Baseline
Establish meaningful energy-performance indicators and an energy baseline.
Step 6 – Establish Objectives and Action Plans
Define measurable energy objectives and improvement actions.
Step 7 – Implement the EnMS
Implement the required processes, controls, monitoring, competence and awareness.
Step 8 – Internal Audit
Conduct an internal audit to determine readiness.
Step 9 – Management Review
Top management reviews the EnMS and energy performance.
Step 10 – Certification Assessment
The certification body evaluates the organization's Energy Management System against ISO 50001 requirements.
Documents Required for ISO 50001 Certification in Malaysia
Typical documentation and objective evidence may include:
- Energy policy
- EnMS scope
- Energy review
- Energy data
- Significant energy uses
- Energy baselines
- EnPIs
- Objectives
- Targets
- Action plans
- Operational controls
- Monitoring records
- Measurement records
- Competence records
- Internal audit records
- Management review records
- Corrective-action records
- Applicable legal and regulatory information
For an EECA-covered organization, statutory records should also be maintained according to the Energy Commission's applicable requirements.
ISO 50001 Certification Cost in Malaysia
There is no single fixed ISO 50001 certification cost in Malaysia.
The cost can vary according to:
- Organization size
- Number of employees
- Number of sites
- Certification scope
- Energy complexity
- Production processes
- Number of shifts
- Existing management systems
- Multi-site arrangements
- Audit duration
A semiconductor manufacturing plant, data centre and small commercial organization will have very different certification requirements.
For a Malaysia-specific quotation:
http://www.scscertification.com/contactus.php
How Long Does ISO 50001 Certification Take in Malaysia?
The timeline depends on:
- Organization size
- Scope
- Number of sites
- Energy complexity
- Existing management systems
- Energy data availability
- Implementation readiness
- Internal-audit readiness
Organizations with an established management-system culture may be able to prepare more efficiently.
However, certification should be based on actual implementation and objective evidence rather than an artificially shortened process.
How to Get ISO 50001 Certification Faster in Malaysia
A practical route is to:
- Define the scope.
- Collect energy data.
- Identify applicable Malaysian requirements.
- Determine significant energy uses.
- Complete the energy review.
- Establish EnPIs.
- Establish the energy baseline.
- Set objectives and targets.
- Implement operational controls.
- Establish monitoring.
- Conduct internal audit.
- Complete management review.
- Prepare for certification assessment.
For EECA-covered energy consumers, statutory deadlines relating to REM appointment, EnMS, EE&C reports and energy audits should be managed independently.
Benefits of ISO 50001 Certification in Malaysia
ISO 50001 can help Malaysian organizations:
- Improve energy performance
- Identify energy-saving opportunities
- Strengthen energy monitoring
- Control significant energy uses
- Reduce avoidable energy waste
- Improve operational efficiency
- Support sustainability programmes
- Strengthen energy governance
- Improve customer confidence
- Support supply-chain requirements
- Support ESG initiatives
- Improve energy-related decision making
ISO 50001 does not guarantee a specific percentage of energy savings. Results depend on the organization's baseline performance, technology, operating conditions and improvement actions.
ISO 50001 and ESG in Malaysia
Energy performance is an important part of many corporate sustainability strategies.
ISO 50001 can provide structured evidence around:
- Energy consumption
- Energy performance
- Energy objectives
- Improvement actions
- Monitoring
- Continual improvement
It can therefore complement broader:
- ESG programmes
- Sustainability reporting
- Carbon-reduction programmes
- Energy-transition strategies
- Corporate environmental objectives
ISO 50001 Integration with ISO 9001 and ISO 14001
Malaysian organizations already certified to ISO 9001 or ISO 14001 can potentially integrate common management-system processes.
These may include:
- Document control
- Internal audit
- Corrective action
- Competence
- Awareness
- Management review
- Objectives
- Continual improvement
However, ISO 50001-specific energy-management requirements must still be implemented and demonstrated.
Is ISO 50001 Mandatory in Malaysia?
ISO 50001 certification itself should not be described as universally mandatory for every Malaysian company.
However, EECA 2024 establishes statutory obligations for applicable energy consumers.
The Energy Commission states that energy consumers reaching or exceeding 21,600 GJ in 12 consecutive months must meet specified requirements including REM appointment, EnMS implementation, EE&C reporting and energy auditing.
Therefore, Malaysian organizations should ask two separate questions:
1. Does my organization need or benefit from ISO 50001 certification?
2. Does my organization have statutory obligations under EECA 2024?
These questions should not be treated as interchangeable.
ISO 50001 and the Transition from EMEER 2008 to EECA 2024
Malaysia's energy-management regulatory framework has also transitioned from the former Efficient Management of Electrical Energy Regulations 2008 (EMEER 2008) to the EECA 2024 framework.
The Energy Commission states that EMEER 2008 was repealed when EECA 2024 came into force, and installations are no longer subject to the former requirements once the new framework applies.
The Commission also explains the transition from Registered Electrical Energy Manager (REEM) arrangements to the new Registered Energy Manager (REM) framework.
This is particularly relevant when Malaysian organizations update older energy-management programmes.
Why Choose SCS for ISO 50001 Certification in Malaysia?
SCS can discuss ISO 50001 certification according to your:
- Malaysian location
- Industry
- Energy profile
- Number of employees
- Number of sites
- Certification scope
- Existing ISO systems
- Customer requirements
- Tender requirements
- Energy-management objectives
The certification discussion can be tailored for organizations in Kuala Lumpur, Selangor, Penang, Johor, Melaka, Negeri Sembilan, Kedah, Perak and other Malaysian business locations.
For EECA-covered organizations, the ISO 50001 certification discussion should remain separate from statutory Energy Commission compliance.
Get ISO 50001 Certification in Malaysia with SCS
If your organization wants to establish a structured Energy Management System, ISO 50001 can provide a recognized framework for improving energy performance.
For Malaysian organizations, the decision should also consider the country's current energy-efficiency framework, including EECA 2024, the 21,600 GJ threshold, Registered Energy Manager requirements, EnMS obligations, EE&C reporting and energy-audit requirements where applicable.
SCS can discuss your ISO 50001 certification scope, Malaysian industry requirements, location, certification process, expected timeline and quotation.
Get certified with SCS.
http://www.scscertification.com/contactus.php
|
UAE |
Saudi Arabia |
UK |
Canada |
India |
|
SCS Certification6th Floor Salaam Bldg, Office 9 Al Marakib St, Al Danah, Zone 1,Abu Dhabi, UAE. |
SCS Certification (Partners)7713, King Abdulaziz Street, Al Dawasir, Dammam, 32416Kingdom of Saudi Arabia |
SCS CERTIFICATION EUROPE LIMITED Office 6996,58 Peregrine Road, Hainault, Ilford, Essex, United Kingdom IG6 3SZ. |
SCS Certification (E) Limited Oaklea Blvd, Brampton, ONL6Y 5A2, Canada. |
Chennai: Building bearing No.19/35, V 270,Situated on First Floor, Mount Road, Little Mount, Chennai – 600015, India. Bangalore: Bangalore, Karnataka, India. |
Need ISO 50001 Certification for Your Business?
Speak with our certification specialists to understand certification requirements, audit process, implementation timelines and accredited certification services.
